Far Eastern Drilling are API (API-7-1 & API Spec Q1) factory specializes in drill bits, such as Tricone Bit,PDC Bit,Hybrid Bit,HDD Hole Opener,Foundation Roller Cone Bits and related drilling tools,application fields includes for oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, hydrographic survey, water well drilling, HDD pipelines installation projects, foundation rock piling projects. We can offer both TCI and Steel (Milled) Tooth in a variety of sizes and all most of IADC codes in stock.
In hard and long rock crossing, working life of rock reamer is extremely important , one-time cross successfully saves huge cost of labor, cost of renting rigs, cost of drilling consumables. If one-time cross failed, it would be huge cost for drillers to pull out the reamers and reaming again.
Metal-face sealed bearing roller cone has perfect performance in drilling long and hard rock sections, drillers don't need to worry when using metal-face sealed bearing roller cones.
Roller cone bits of 17 1/2" tricone bit is very big, the reaming step is at least 12" for soft formations, working with powerful mud pump, the penetration rate in soft rocks is much faster than TCI roller cones.
Solidkey is API certified factory of roller cone bit and PDC bits, both horizontal drilling backreamers and single roller cone bits for trenchless application are available.
The horizontal directional drill reamer could work with trencher of Ditch Witch, Vermeer, etc , the
thread connection could be produced to NC, FH, IF, REG, FS, ... to be connected with various of drill pipes.
Main parameter of drill reamer, all below parameters could be customized:
1>Shaft OD and length;
2>Thread connection;
3>Diameter of reamer;
4>Diameter of stabilizer;
5>Type&Qty of roller cone cutters.
| Basical Specification |
| Size of Rock Reamer |
30 Inch |
| |
762mm |
| Cutter Type |
Elastomer sealed bearing cutters for 17 1/2" tricone bit |
| Thread Connection |
6 5/8 REG pin & box(Customized) |
| IADC Code |
217 |
| Bearing Type |
Sealed Bearing |
| Roller Cutter Quantity |
4 |
| Overall Length (mm) |
1800 |
| Operating Parameters |
| WOB (KN/mm) |
0.3~0.85 |
| RPM (r/mim) |
180~60 |
| Formation |
Hard formations for high compressive strength,such as sandstone,hard shale,dolomite,hard gypsum,chert,granite,etc. |
Steel tooth HDD rock reamer is produced with steel tooth roller cone bit, it is of higher penetration rate than tungsten carbide insert rock reamer in drilling soft rocks.
The disadvantage is that the steel tooth rock reamer is not suitable for drillling hard rocks.
The body is enhanced by tungsten carbide hard alloy, the arm-back of roller cone is armoured by tungsten carbide to sustain heavy load in crossing.
Far Eastern Drilling produces both tungsten carbide inserts and steel tooth roller cone bits for rock reamer, we are the factory of roller cone bits, so our price for rock reamer is competitive.
| Bit Size |
API REG PIN |
Torque |
Weigt |
| INCH |
MM |
INCH |
KN.M |
KGS |
| 3 3/8 |
85.7 |
2 3/8 |
4.1-4.7 |
4.0-6.0 |
| 3 1/2 |
88.9 |
4.2-6.2 |
| 3 7/8 |
98.4 |
4.8-6.8 |
| 4 1/4 |
108 |
5.0-7.5 |
| 4 1/2 |
114.3 |
5.4-8.0 |
| 4 5/8 |
117.5 |
2 7/8 |
6.1-7.5 |
7.5-8.0 |
| 4 3/4 |
120.7 |
7.5-8.0 |
| 5 1/8 |
130.2 |
3 1/2 |
9.5-12.2 |
10.3-11.5 |
| 5 1/4 |
133.4 |
10.7-12.0 |
| 5 5/8 |
142.9 |
12.6-13.5 |
| 5 7/8 |
149.2 |
13.2-13.5 |
| 6 |
152.4 |
13.6-14.5 |
| 6 1/8 |
155.6 |
14.0-15.0 |
| 6 1/4 |
158.8 |
14.4-18.0 |
| 6 1/2 |
165.1 |
14.5-20.0 |
| 6 3/4 |
171.5 |
20.0-22.0 |
| 7 1/2 |
190.5 |
4 1/2 |
16.3-21.7 |
28.0-32.0 |
| 7 5/8 |
193.7 |
32.3-34.0 |
| 7 7/8 |
200.0 |
33.2-35.0 |
| 8 3/8 |
212.7 |
38.5-41.5 |
| 8 1/2 |
215.9 |
39.0-42.0 |
| 8 5/8 |
219.1 |
40.5-42.5 |
| 8 3/4 |
222.3 |
40.8-43.0 |
| 9 1/2 |
241.3 |
6 5/8 |
38-43.4 |
61.5-64.0 |
| 9 5/8 |
244.5 |
61.8-65.0 |
| 9 7/8 |
250.8 |
62.0-67.0 |
| 10 |
254.0 |
68.0-75.0 |
| 10 1/2 |
266.7 |
72.0-80.0 |
| 10 5/8 |
269.9 |
72.0-80.0 |
| 11 1/2 |
292.1 |
79.0-90.0 |
| 11 5/8 |
295.3 |
79.0-90.0 |
| 12 1/4 |
311.2 |
95.0-102.0 |
| 12 3/8 |
314.3 |
96.0-103.0 |
| 12 1/2 |
317.5 |
97.0-104.0 |
| 13 1/2 |
342.9 |
105.0-134.0 |
| 13 5/8 |
346.1 |
108.0-136.0 |
| 14 3/4 |
374.7 |
7 5/8 |
46.1-54.2 |
140.0-160.0 |
| 15 |
381.0 |
145.0-165.0 |
| 15 1/2 |
393.7 |
160.0-180.0 |
| 16 |
406.4 |
200.0-221.0 |
| 17 1/2 |
444.5 |
260.0-270.0 |
| 26 |
660.4 |
740.0-760.0 |
FAQ
1. How to get an exact quotation?
Answer: Please send us detailed information as below:
-Tricone bits(Diameter, IADC code)
-PDC bits(Matrix or Steel body, blades quantity, cutter size, etc)
-Hole opener(Diameter, size of pilot hole, hardness of rocks, thread connection of your drill pipe, etc.)
-Roller cutters(Diameter of cones, model number, etc.)
-Core barrel(Diameter, quantity of cutters, connection, etc.)
A simple way is sending us photos .
Besides above, if possible please provide more information as below:
Drilling depth in vertical well drilling, Drilling length in HDD, hardness of rocks, Capacity of drill rigs, application(oil/gas well drilling, or water well drilling, or HDD, or foundation).
Incoterm: FOB or CIF or CFR, by plane or ship, port of destination/discharge.
The more information provided, the more exact quotation will be offered.
2. What is the quality control for your products?
Answer: All of our production are in lines of API rules and ISO9001:2015 strictly, from signing contract , to raw materials, to each production processes, to product finish, to after-sale service, each processes and sections are in accordant with standard.
3. About lead time,payment terms, delivery ?
Answer: We always have regular models available in stock, prompt delivery is one of our advantages. Mass production depends on quantity of order.
We accept all regular payment terms including L/C, T/T, etc.
We are near from Beijing airport and Tianjin(Xingang) seaport, transportation from our factory to Beijing or Tianjin only takes one day, fast and very economical inland charges.
4. What is the history of Far Eastern ?
Answer: The drilling bits business was started at year 2003 only for China domestic requirement, the name Far Eastern was started from year 2009, now Far Eastern has exported to more than 35 countries and areas.
5. Do you have Referenced Letters /Recommendation Letters from old customers?
Answer: Yes, we have many referenced letters/recommendation letters issued by old customers who would like to share our stories.
Audited Supplier 
){kind=link}
){kind=link}